N443SH Robinson Helicopter Company R44 II accident

NTSB ERA21LA252 · 2021-06-14 · Sylva, NC · near 24A

Docket — crew, injuries and powerplant

Factual narrative

The pilot was demonstrating emergency procedures and non-standard maneuvers in the helicopter to a new hire pilot and a company sales representative. After several simulated engine failures and autorotations, the pilot initiated a “quick stop” maneuver. The maneuver he performed did not comport with the published procedure in the manufacturer’s flight training guide, and in some cases contradicted the factory guidance in the pilot’s admittedly “slightly modified maneuver.” The pilot initiated the maneuver about 40 ft. above the runway with about 40 knots airspeed. He reduced throttle, which was not directed, added left pedal, which was opposite of that directed, the engine and rotor rpm decayed, and the helicopter descended. The pilot said that he could not recover the engine or rotor rpm prior to the collision with the runway, which substantially damaged the helicopter. The 3 occupants of the helicopter egressed without injury. The pilot stated there were no mechanical deficiencies with the helicopter that would have prevented normal operation.

Probable cause

The pilot’s intentional departure from the procedures published in the manufacturer’s flight training guide, and his subsequent loss of engine rpm, rotor rpm, and aircraft control. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
81
Nearest airport
JACKSON COUNTY
Distance from field
0.0
Airport elevation
2857

Aircraft

RegistrationMakeModelDamageFAR part
N443SH ROBINSON HELICOPTER COMPANY R44 II SUBS 091

Sequence of events

#OccurrencePhase
1 Landing Hard landing defining Cruise

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Powerplant parameters-Incorrect use/operation cause
Personnel issues-Task performance-Use of equip/info-Use of policy/procedure-Instructor/check pilot cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Instructor/check pilot cause