N9038N Aero Commander 500 S accident

NTSB CEN21LA298 · 2021-06-25 · Jennings, LA · near 3R7

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that as he was landing from a visual approach at his destination airport, he realized he had failed to extend the landing gear and the airplane landed with the landing gear retracted. The airplane skidded down the runway, departed the runway surface and hit a berm and fence before it came to rest. The airplane sustained substantial damage to the fuselage and both wings. The pilot reported that there were no preaccident mechanical malfunctions or failures with the airplane that would have precluded normal operation. After the accident, the pilot stated that despite hours of operation, always use a paper or electronic written checklist.

Probable cause

The pilot’s failure to extend the landing gear before landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
3500
Visibility (sm)
10
Wind direction
140
Wind speed (kt)
7
Temperature (F)
84
Nearest airport
Jennings Muni
Distance from field
0.0
Airport elevation
23

Aircraft

RegistrationMakeModelDamageFAR part
N9038N AERO COMMANDER 500 S SUBS 091

Sequence of events

#OccurrencePhase
3 Landing-landing roll Runway excursion Cruise
4 Landing-flare/touchdown Landing gear not configured defining Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Use of checklist-Pilot factor
Personnel issues-Action/decision-Action-Forgotten action/omission-Pilot cause
Personnel issues-Task performance-Use of equip/info-Use of equip/system-Pilot cause
Aircraft-Aircraft systems-Landing gear system-Gear extension and retract sys-Not used/operated cause