N66NC accident

NTSB CEN21LA315 · 2021-07-10 · Longmont, CO · near LMO

Docket — crew, injuries and powerplant

Summary

The pilot reported that he performed the “before starting engine” and “starting engine” checklists and everything was normal before taking off in the twin-engine airplane. He performed an engine runup and then started his takeoff roll. The pilot reported that about halfway down the runway the airplane was not accelerating as fast as it should. He attempted to rotate the airplane; however, “the airplane mushed off the runway.” The airplane settled back onto the runway, then exited the departure end of the runway, where it sustained substantial damage to the wings and fuselage. The airplane engine monitor data indicated the airplane’s engines were operating consistent with each other at takeoff power at the time of the accident. Density altitude at the time of the accident was 7,170 ft and according to performance charts, there was adequate runway for takeoff. The reason for the loss of performance could not be determined.

Full narrative

On July 10, 2021, about 0845 mountain daylight time, a Cessna 421C airplane, N66NC, was substantially damaged when it was involved in an accident near Longmont, Colorado. The pilot and three passengers received minor injuries. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight. The pilot reported that he performed the “before starting engine” and “starting engine” checklists and everything was normal. He performed an engine runup and then started his takeoff roll. The pilot reported that about halfway down the runway he sensed the airplane was not accelerating as fast as it should. He attempted to rotate; however, “the airplane mushed off the runway.” The airplane settled back onto the runway, then exited off the departure end of the runway. The airplane came to rest upright, and a post-crash fire ensued.

The airplane sustained substantial damage to both wings and the fuselage. The airplane was equipped with a JPI EDM 760 engine monitor. The unit was retrieved from the airplane and the NVM (nonvolatile memory) downloaded. According to the engine manufacturer, the data indicated the airplane’s engines were operating consistent with each other at takeoff power until power was reduced for the rejected takeoff. Referring to the Cessna 421C Pilot’s Operating Handbook, for the conditions at the time of the accident, the airplane’s normal takeoff distance would have been about 2,700 ft to clear a 50 ft obstacle. Density altitude at the time of the accident was 7,170 ft.

Probable cause

The loss of performance for reasons that could not be determined. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
140
Wind speed (kt)
3
Temperature (F)
79
Nearest airport
Vance Brand Airport
Distance from field
0.5
Airport elevation
5055

Aircraft

RegistrationMakeModelDamageFAR part
N66NC — — SUBS 091

Sequence of events

#OccurrencePhase
2 Takeoff Miscellaneous/other Takeoff
3 Takeoff-rejected takeoff Runway excursion Takeoff
4 Takeoff Loss of control in flight defining Takeoff

Findings

Finding
Personnel issues-Action/decision-Info processing/decision-Decision making/judgment-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Climb rate-Attain/maintain not possible cause
Environmental issues-Conditions/weather/phenomena-Temp/humidity/pressure-High density altitude-Effect on equipment cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause