N76596 accident

NTSB ERA21LA348 · 2021-07-25 · Bloomsburg, PA · near N13

Docket — crew, injuries and powerplant

Factual narrative

The pilot had recently purchased the airplane and was flying with a flight instructor to meet his insurance company requirements and to become familiar with the aircraft. He reported that during the landing rollout, the flight instructor told him to utilize the brake, since the aircraft was starting to turn and they “were running out of rudder.” The airplane then veered to the left and nearly came to a stop but departed the runway and descended an embankment, impacted terrain, which resulted in substantial damage to the right wing and fuselage. The flight instructor reported that when the airplane began to yaw left, he instructed the pilot to utilize the brakes and he simultaneously applied full right rudder but could not arrest the yawing motion. The airplane was not equipped with brake controls for the right seat position. The pilot reported that there were no pre-accident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Probable cause

The pilot’s loss of directional control during the landing rollout, which resulted in a runway excursion and impact with terrain. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
3700
Visibility (sm)
10
Wind direction
0
Temperature (F)
77
Nearest airport
BLOOMSBURG MUNI
Distance from field
1.0
Airport elevation
481

Aircraft

RegistrationMakeModelDamageFAR part
N76596 — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Runway excursion Cruise
2 Landing-landing roll Loss of control on ground defining Cruise

Findings

Finding
Personnel issues-Action/decision-Action-Incorrect action performance-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Incorrect use/operation cause