N782JA accident

NTSB ERA21LA359 · 2021-09-09 · Venice, FL · near VNC

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that, during the descent for landing, the engine did not respond when he attempted to level off and increase power. Further attempts to adjust the throttle were unsuccessful and engine rpm remained at 1,900. As the airplane was over the runway, the pilot was unable to slow it down, so he forced the nose down onto the grass that was beyond the runway end. After the airplane touched down, it bounced twice, collided with a fence, and nosed over. The airplane was substantially damaged and the pilot and passenger were unhurt. The Federal Aviation Administration inspector who responded to the scene confirmed the substantial damage and found that the connecting hardware for the linkage between the fuel injector servo and the throttle cable were missing. The missing bolt, washer, and nut were subsequently found loose, inside the engine cowling; however, the nut was inconsistent with the nut required by the aircraft illustrated parts manual. The engine had been overhauled and reinstalled about 50 operating hours before the accident.

Probable cause

Maintenance personnel’s failure to use the correct throttle linkage hardware when reinstalling the engine, resulting in a disconnection of the throttle during flight. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
3900
Visibility (sm)
8
Wind direction
240
Wind speed (kt)
11
Temperature (F)
86
Nearest airport
VENICE MUNI
Distance from field
1.0
Airport elevation
18

Aircraft

RegistrationMakeModelDamageFAR part
N782JA — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing Nose over/nose down Cruise
2 Approach-IFR final approach Powerplant sys/comp malf/fail defining Cruise

Findings

Finding
Aircraft-Aircraft power plant-Engine fuel and control-Fuel controlling system-Incorrect service/maintenance cause
Personnel issues-Task performance-Maintenance-Replacement-Maintenance personnel cause