N419TT accident

NTSB WPR21LA345 · 2021-07-24 · Rock Springs, WY · near KRKS

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that, before takeoff he calculated the density altitude to be 9,700 ft. During takeoff, shortly after rotation, he “felt” that the airplane was slightly nose high and the stall warning horn aural alert activated, and the airplane began to shudder. The pilot then aborted the takeoff after he found it difficult to nose the airplane down to attain airspeed. About 10 ft above the ground, the airplane aerodynamically stalled and landed tail first then a hard bounce on the main landing gear. Subsequently, the right wing sustained substantial damage. The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Probable cause

The pilot’s improper pitch control during takeoff which resulted in an aerodynamic stall and subsequent hard landing The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
82
Nearest airport
Southwest Wyoming Regional Air
Distance from field
0.0
Airport elevation
6764

Aircraft

RegistrationMakeModelDamageFAR part
N419TT — — SUBS 091

Sequence of events

#OccurrencePhase
1 Takeoff-rejected takeoff Aerodynamic stall/spin defining Takeoff

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Pitch control-Not attained/maintained cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Airspeed-Not attained/maintained cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Angle of attack-Not attained/maintained cause
Environmental issues-Conditions/weather/phenomena-Temp/humidity/pressure-High density altitude-Effect on equipment factor