N2923W Christen Industries Inc A-1 accident

NTSB CEN21LA451 · 2021-09-23 · Eden Prairie, MN · near FCM

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported he had landed at his destination airport in his tailwheel-equipped airplane and was turning off the runway onto the taxiway when the airplane’s right wing dipped and struck the runway. The airplane subsequently ground looped, nosed over and came to rest inverted. The airplane sustained substantial damage to both wings and left horizontal stabilizer. The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation. The pilot also reported that the degree and speed of the turn resulted in the wing striking the runway.

Probable cause

The pilot’s failure to maintain directional control during the landing roll resulting in a ground loop. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
55
Nearest airport
Flying Cloud Airport
Distance from field
1.0
Airport elevation
900

Aircraft

RegistrationMakeModelDamageFAR part
N2923W CHRISTEN INDUSTRIES INC A-1 SUBS 091

Sequence of events

#OccurrencePhase
2 Taxi-from runway Loss of control on ground defining Taxi
3 Taxi-from runway Nose over/nose down Taxi

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause