N7157W accident

NTSB CEN22LA075 · 2021-12-09 · Rockwall, TX · near F46

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that he was flying a visual approach with a steep glidepath to avoid power lines on final approach and a higher-than-normal approach speed due to high winds. The airplane touched down toward the departure end of the runway and bounced once. The pilot did not perform a go-around and continued the landing attempt. The airplane touched down again, departed the runway, and impacted a barbed wire fence. The airplane sustained substantial damage to both wings. The pilot reported that there were no preaccident mechanical malfunctions or failures with the airplane that would have precluded normal operation and that he should have diverted to another airport and rented a vehicle to drive to the destination.

Probable cause

The pilot’s failure to go-around during the unstable visual approach, which resulted in a bounced touchdown near the end of the runway and the subsequent runway excursion. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
230
Wind speed (kt)
11
Temperature (F)
77
Nearest airport
RALPH M HALL/ROCKWALL MUNI
Distance from field
1.0
Airport elevation
574

Aircraft

RegistrationMakeModelDamageFAR part
N7157W — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing Runway excursion defining Cruise

Findings

Finding
Personnel issues-Action/decision-Action-Incorrect action performance-Pilot cause
Aircraft-Aircraft oper/perf/capability-Aircraft capability-Landing distance-Capability exceeded cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Environmental issues-Physical environment-Object/animal/substance-Fence/fence post-Effect on equipment factor