N4209Q accident

NTSB CEN22LA092 · 2022-01-03 · Minocqua, WI · near ARV

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that while landing following a night instrument flight, on a known contaminated runway and employing aerodynamic braking, the airplane contacted a snow and ice patch and veered to the left. The airplane continued left until it contacted an unplowed snowbank on the left side of the runway and nosed over coming to rest inverted. The airplane sustained substantial damage to both wings, both ailerons, the vertical stabilizer, and rudder. The pilot reported that there were no preaccident mechanical malfunctions or failures with the airplane that would have precluded normal operation. The pilot reported that prior to the flight he had filed and instrument flight plan and was aware of a Notice to Airmen (NOTAM) that at most 10% of the runway had compacted snow. An area 60-ft wide was plowed and swept.

Probable cause

The pilot’s loss of control during landing when the airplane encountered ice and snow on the runway. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Night/Dark
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
-2
Nearest airport
LAKELAND/NOBLE F LEE MEML FLD
Distance from field
0.0
Airport elevation
1629

Aircraft

RegistrationMakeModelDamageFAR part
N4209Q — — SUBS 091

Sequence of events

#OccurrencePhase
2 Landing-landing roll Loss of control on ground defining Cruise
3 Landing-landing roll Collision during takeoff/land Cruise
4 Landing-landing roll Nose over/nose down Cruise

Findings

Finding
Environmental issues-Physical environment-Runway/land/takeoff/taxi surface-Snow/slush/ice covered surface-Effect on operation cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Attain/maintain not possible cause