N11373 accident

NTSB CEN22LA125 · 2022-02-09 · Burleson, TX · near FWS

Docket — crew, injuries and powerplant

Factual narrative

The student pilot reported that he did two successful touch and go landings with his instructor pilot, after which, the instructor got out of the airplane and the student pilot took off solo to practice in the landing pattern. While on downwind in the pattern, the student pilot accidentally pulled the mixture knob and the engine quit. The student pilot attempted to restart the engine but was not successful. He tried to land the airplane in a nearby field but contacted a stand of trees and impacted the ground nearly vertical. The airplane sustained substantial damage to the wings and forward fuselage. The student pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Probable cause

The student pilot accidentally pulling the mixture control in the landing pattern which resulted in a loss of engine power and forced landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
340
Wind speed (kt)
6
Temperature (F)
61
Nearest airport
Spinks Airport
Distance from field
1.0
Airport elevation
760

Aircraft

RegistrationMakeModelDamageFAR part
N11373 — — SUBS 091

Sequence of events

#OccurrencePhase
1 Approach-VFR pattern downwind Miscellaneous/other defining Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Use of equip/system-Student/instructed pilot cause