N2509N accident

NTSB ERA22LA132 · 2022-02-11 · New Bern, NC · near EWN

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that during his landing roll, he attempted to slow the airplane as he exited the runway for the taxiway. As he applied brakes, the left brake loss pressure and the right brake maintained its pressure and operated normally. This anomaly caused the airplane to ground loop, which resulted in substantial damage to the left wing. Examination of the airplane by a Federal Aviation Administration inspector revealed the left brake master cylinder was void of fluid. Fluid was filled into the master cylinder and when pressure was applied to simulate braking, fluid began to seep from the master cylinder. The master cylinder was disassembled revealing a damaged O-ring seal. The O-ring was pinched and cut; therefore, unable to maintain hydraulic fluid within the master cylinder and resulted in the loss of braking. A review of maintenance records reveal that the braking system was serviced about a month prior, but no anomalies were noted during the service.

Probable cause

The loss of brake pressure on the left brake due to a failed O-ring seal. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
66
Nearest airport
COASTAL CAROLINA RGNL
Distance from field
0.0
Airport elevation
17

Aircraft

RegistrationMakeModelDamageFAR part
N2509N — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Sys/Comp malf/fail (non-power) defining Cruise
2 Landing-landing roll Loss of control on ground Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Master cylinder/brake valve-Failure factor