N552XL Liberty Aerospace Incorporated LIBERTY XL-2 accident

NTSB WPR22LA116 · 2022-03-02 · Las Cruces, NM · near LRU

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that, during takeoff with a density altitude of 6,750 ft and the airplane’s weight near gross weight, the airplane’s acceleration seemed sluggish. The airplane lifted off about 1/3 of the way down the runway after achieving 55 knot rotation speed, but the climb was also “sluggish”. The airplane cleared the airport perimeter fence and began to settle. The airplane subsequently touched down on soft dirt and nosed over. The airplane sustained substantial damage to both wings. The pilot reported that there were no preaccident mechanical malfunctions or failures with the airplane that would have precluded normal operation and he believed that the cause of the accident was a combination of high-density altitude and the airplane’s weight close to the maximum allowable gross weight.

Probable cause

The airplane’s inability to climb during takeoff due to a degradation of engine performance due to high density altitude. Contributing to the accident was the pilot’s decision to continue the takeoff. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
79
Nearest airport
LAS CRUCES INTL
Distance from field
0.0
Airport elevation
4456

Aircraft

RegistrationMakeModelDamageFAR part
N552XL LIBERTY AEROSPACE INCORPORATED LIBERTY XL-2 SUBS 091

Sequence of events

#OccurrencePhase
1 Takeoff Miscellaneous/other Takeoff
2 Takeoff Collision during takeoff/land defining Takeoff

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Climb rate-Attain/maintain not possible cause
Personnel issues-Action/decision-Info processing/decision-Decision making/judgment-Pilot cause
Environmental issues-Conditions/weather/phenomena-Temp/humidity/pressure-High density altitude-Effect on equipment cause