N7523Z accident
NTSB CEN22LA161 · 2022-03-26 · Benton, AR · near KSUZ
Docket — crew, injuries and powerplant
Factual narrative
The pilot planned to complete two takeoffs and landings (touch-and-goes) followed by a full stop landing. He executed a go-around and a touch-and-go before the accident landing. After the airplane touched down during the accident landing, the airplane tail began to settle to the runway. The pilot responded by pulling the control stick aft. About 2-3 seconds later, the airplane began to pitch up and bank to the right. At that point, the pilot “realized that [he] was behind the aircraft.” He attempted to execute a go-around but lost control of the airplane, resulting in a runway excursion. The airplane came to rest in a ditch off the right side of the runway. The right wing sustained substantial damage. The pilot reported that there were no mechanical malfunctions or failures with the airplane before the accident.
Probable cause
The pilot’s failure to maintain control of the airplane while landing. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- NONE
- Ceiling (ft)
- 0
- Visibility (sm)
- 10
- Wind direction
- 180
- Wind speed (kt)
- 7
- Temperature (F)
- 70
- Nearest airport
- Saline County
- Distance from field
- 0.2
- Airport elevation
- 389
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N7523Z | — | — | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 1 | Landing Loss of control on ground defining | Cruise |
Findings
| Finding | |
|---|---|
| Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot | cause |