N9287U accident

NTSB WPR22LA140 · 2022-04-01 · Merced, CA

Docket — crew, injuries and powerplant

Factual narrative

The pilot in the helicopter reported that, he was conducting an agricultural aerial application flight. Before he started the spray operation, he overflew the field to identify obstacles. While approaching the northeast corner of the fields from the south, he overflew one set of wires, “ducked down” into the corner to spray, and pulled up as he approached the edge of the field. As he pulled up, he saw wires he had not seen before and tried to hit them with the wire cutter installed on the helicopter. The helicopter impacted the wires, descended, and impacted the ground. The helicopter sustained substantial damage to the fuselage. The pilot reported that there were no preaccident mechanical failures or malfunctions with the helicopter that would have precluded normal operation.

Probable cause

The pilot’s failure to see and avoid wires while conducting an aerial application flight, which resulted in a wire strike and ground impact. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
332
Temperature (F)
72
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N9287U — — SUBS 137

Sequence of events

#OccurrencePhase
2 Maneuvering-low-alt flying Low altitude operation/event defining Climb

Findings

Finding
Personnel issues-Psychological-Attention/monitoring-Monitoring environment-Pilot cause
Environmental issues-Physical environment-Object/animal/substance-Wire-Effect on operation factor