N6076C Cessna Aircraft Co 162 accident
NTSB WPR22LA145 · 2022-04-06 · Palo Alto, CA · near PAO
Docket — crew, injuries and powerplant
Factual narrative
The student pilot reported that, he departed on a solo flight, but decided to turn back to his departure airport after he encountered turbulence. During his return to the airport his altitude indication and some engine instruments were appearing intermittently on the glass panel displays. He flew the airport traffic pattern uneventfully and complied with the instructions he received from air traffic control. The student pilot decided to perform a go-around during his first landing attempt after the airplane bounced. He felt that his approach was stable during his second attempt, but the airplane bounced again during touchdown. The student pilot initiated another go-around, but pulled too far back on the yoke, which resulted in a stall and impact with the ground. The wings and fuselage were substantially damaged. The pilot reported that other than the intermittent instrument indications, there were no preimpact mechanical failures or malfunctions with the airplane that would have precluded normal operation.
Probable cause
The pilot’s failure to maintain pitch control during a go-around maneuver, which resulted in an aerodynamic stall and impact with the ground. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- Serious
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- NONE
- Ceiling (ft)
- 0
- Visibility (sm)
- 10
- Wind direction
- 0
- Temperature (F)
- 73
- Nearest airport
- Palo Alto Airport
- Distance from field
- 0.1
- Airport elevation
- 7
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N6076C | CESSNA AIRCRAFT CO | 162 | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 2 | Approach-VFR go-around Aerodynamic stall/spin defining | Cruise |