N426DB Robinson Helicopter Company R44 II accident

NTSB ERA22LA188 · 2022-04-12 · Calhoun, GA

Docket — crew, injuries and powerplant

Factual narrative

According to the pilot, he repositioned the helicopter within the landing zone after landing to use its full length for the planned departure. As he applied takeoff power, the pilot inadvertently climbed the helicopter into wires above the main rotor blades. The pilot subsequently reduced power and attempted a run-on landing to an adjacent road, but the main rotor struck a building. The helicopter rolled on its side and was substantially damaged. The pilot reported that there were no preaccident mechanical malfunctions or failures with the helicopter that would have precluded normal operation.

Probable cause

The pilot’s failure to maintain clearance from wires during takeoff. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
220
Wind speed (kt)
7
Temperature (F)
82
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N426DB ROBINSON HELICOPTER COMPANY R44 II SUBS 091

Sequence of events

#OccurrencePhase
1 Takeoff Collision during takeoff/land defining Takeoff

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-(general)-Not attained/maintained cause
Personnel issues-Task performance-Planning/preparation-(general)-Pilot cause