N688G accident
NTSB ERA22LA269 · 2022-06-11 · Butler, PA · near BTP
Docket — crew, injuries and powerplant
Factual narrative
The pilot said the traffic pattern was busy, so he began the pre-rotation process as he taxied the gyroplane onto the runway to depart. At that time, the rotor disk rpm was at 140 rpm, which was 20 rpm above the recommended takeoff speed. The pilot said he slowly applied power because he had a passenger onboard, which may have allowed time for the disk speed to decay and become susceptible to blade flap. During the takeoff roll, the gyroplane’s main rotor blades struck and severed the tail assembly, resulting in substantial damage. The pilot said there were no preimpact mechanical malfunctions or failures that would have precluded normal operation.
Probable cause
The pilot’s failure to monitor rotor disk speed on takeoff, which resulted in blade flapping and the main rotor blades striking the gyroplane’s tail assembly. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Ceiling (ft)
- 0
- Visibility (sm)
- 10
- Wind direction
- 0
- Wind speed (kt)
- 5
- Temperature (F)
- 72
- Nearest airport
- PITTSBURGH/BUTLER RGNL
- Distance from field
- 0.0
- Airport elevation
- 1248
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N688G | — | — | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 2 | Takeoff Miscellaneous/other defining | Takeoff |