N378JC Bell Helicopter Textron Canada 206L-4 accident

NTSB CEN22LA294 · 2022-06-30 · Idabel, OK · near 4O4

Docket — crew, injuries and powerplant

Factual narrative

The flight instructor reported that he and pilot receiving instruction were conducting an instructional flight to include practice autorotation maneuvers. The flight instructor reported that he was demonstrating a straight-in autorotation with power recovery but did not apply full power as required. About 10 ft above the runway the low rotor horn sounded, and the pilot attempted to go around, but the helicopter bounced on the runway and pitched forward. The main rotor blades contacted and severed the tail boom, which resulted in substantial damage. The pilot reported there were no preimpact mechanical malfunctions or failures with the helicopter that would have precluded normal operation.

Probable cause

The pilot’s failure to apply full power during the practice autorotation recovery, which resulted in a hard landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
9
Wind direction
60
Wind speed (kt)
6
Temperature (F)
79
Nearest airport
MC CURTAIN COUNTY RGNL
Distance from field
0.5
Airport elevation
471

Aircraft

RegistrationMakeModelDamageFAR part
N378JC BELL HELICOPTER TEXTRON CANADA 206L-4 SUBS 091

Sequence of events

#OccurrencePhase
1 Autorotation Miscellaneous/other Descent
2 Landing-flare/touchdown Hard landing defining Cruise

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Descent rate-Not attained/maintained cause
Personnel issues-Task performance-Use of equip/info-Use of equip/system-Instructor/check pilot cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Instructor/check pilot factor
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Pitch control-Not attained/maintained cause