N1540S Air Tractor Inc AT-502 accident

NTSB CEN22LA342 · 2022-07-21 · East Grand Forks, MN

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that, while maneuvering to apply chemical to a field at low altitude, the top of the vertical stabilizer struck a set of power lines. The pilot reported that “the rudder was hammed and [he] had no rudder control.” The pilot made a forced landing in a wheat field. The airplane sustained substantial damage to the vertical stabilizer. The pilot reported no preaccident failures or malfunctions with the airplane before the collision with the power lines that would have precluded normal operations.

Probable cause

The pilot’s failure to maintain clearance from the power lines during a low-level application pass. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
260
Wind speed (kt)
6
Temperature (F)
76
Distance from field
1.0
Airport elevation
844

Aircraft

RegistrationMakeModelDamageFAR part
N1540S AIR TRACTOR INC AT-502 SUBS 137

Sequence of events

#OccurrencePhase
2 Maneuvering Low altitude operation/event defining Climb

Findings

Finding
Personnel issues-Psychological-Attention/monitoring-Monitoring environment-Pilot cause
Environmental issues-Physical environment-Object/animal/substance-Wire-Awareness of condition cause