N3560T Taylorcraft Aviation Corp F19 accident

NTSB CEN23LA004 · 2022-10-03 · Waconia, MN · near 1MN5

Docket — crew, injuries and powerplant

Factual narrative

The pilot of the tail wheel-equipped airplane reported that, during a touch and go, at full power, the airplane began to roll to the right and the pilot was unable to arrest the roll. The airplane entered a corn field north of the runway, and impacted the ground. The airplane sustained substantial damage to the left wing and fuselage. The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Probable cause

The pilot's failure to maintain aircraft control during a touch-and-go landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
150
Wind speed (kt)
12
Temperature (F)
75
Nearest airport
Molnau Airpark
Distance from field
0.0
Airport elevation
0

Aircraft

RegistrationMakeModelDamageFAR part
N3560T TAYLORCRAFT AVIATION CORP F19 SUBS 091

Sequence of events

#OccurrencePhase
1 Initial climb Loss of control in flight defining Takeoff
2 Initial climb Collision with terr/obj (non-CFIT) Takeoff

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Lateral/bank control-Not attained/maintained cause