N874BB Bell Helicopter Textron Canada 505 accident

NTSB WPR23LA009 · 2022-10-08 · Moab, UT

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that, he was initiating a landing to a ledge. As the landing skids contacted the ground, the pilot felt the helicopter settle tail first. Startled by this, he abruptly raised the collective, unaware that he was holding forward cyclic input. As power was applied, the rear skids lifted off the ground first, creating a nose low attitude. The helicopter subsequently rolled over onto its right side substantially damaging the fuselage. The pilot reported that there were no preaccident mechanical failures or malfunctions with the helicopter that would have precluded normal operation.

Probable cause

The pilot’s loss of helicopter control during landing, that resulted in a dynamic roll over. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Serious
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
120
Wind speed (kt)
7
Temperature (F)
64
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N874BB BELL HELICOPTER TEXTRON CANADA 505 SUBS 091

Sequence of events

#OccurrencePhase
2 Landing Dynamic rollover defining Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Lateral/bank control-Not attained/maintained cause