N751AK Cub Crafters FX-3 accident

NTSB WPR23LA020 · 2022-10-04 · Hot Springs, MT · near S09

Docket — crew, injuries and powerplant

Factual narrative

The pilot of the tailwheel-equipped airplane reported that, the airplane touched down in a three-point attitude and slightly ballooned. After the airplane touched down again, the airplane swerved to the left, started to rotate, and subsequently ground looped. The right wing and aileron were substantially damaged. The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Probable cause

The pilot’s failure to maintain directional control during the landing roll. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
59
Nearest airport
HOT SPRINGS
Distance from field
0.0
Airport elevation
2763

Aircraft

RegistrationMakeModelDamageFAR part
N751AK CUB CRAFTERS FX-3 SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-flare/touchdown Loss of control on ground defining Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause