N425Z accident

NTSB CEN23LA103 · 2023-02-06 · Bismarck, ND · near KBIS

Docket — crew, injuries and powerplant

Summary

The pilot taxied to the ramp after an uneventful flight. After moving the throttles toward the ground idle position while in front of the marshaller, the airplane turned left, and the pilot observed that the right brake was inoperative. He attempted to stop the airplane by placing both propeller levers to the feather position and subsequently moved both throttles toward the reverse (beta) position. The airplane continued forward and struck a hangar, which resulted in substantial damaged to the left wing. Postaccident examination of the braking system revealed the brake master cylinders were nearly empty of brake fluid, with no leaks observed. The pilot, who was also a mechanic, recorded completion of a phase inspection about nine months before the accident. The inspection included servicing the brake master cylinders, but the pilot reported he did not check the fluid levels of the master cylinders.

Full narrative

On February 6, 2023, about 1545 central standard time, a Cessna 425, N425Z, was substantially damaged when it was involved in an accident at Bismarck Municipal Airport (BIS), Bismarck, North Dakota. The pilot was not injured and the two passengers sustained minor injuries. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

The pilot reported an uneventful flight and landing at BIS. After taxiing to the ramp, the pilot proceeded to stop the airplane in front of a marshaller. After moving the throttles toward the ground idle position, the pilot observed the airplane turn left and reported that the right brake was inoperative. The pilot reported moving both propeller levers to the feather position and subsequently moved both throttles toward the reverse (beta) position. The airplane continued forward and struck a hangar, which substantially damaged the left wing.

Postaccident examination of the braking system revealed the brake master cylinders were nearly empty of brake fluid, with no leaks observed. A review of maintenance logs revealed that the pilot, who was also a mechanic, recorded completion of the Phase 3 inspection of the Cessna 425 maintenance manual on May 21, 2022. The Phase 3 inspection includes servicing the brake master cylinders. The pilot/mechanic reported that during this inspection he checked the brake pads and checked for leaks around the brakes and the master cylinders. He depressed the brake pedals to find there was resistance; however, he reported that he did not check the fluid levels of the master cylinders during the inspection.

Probable cause

A loss of braking due to inadequate servicing of brake fluid by the pilot/mechanic, which resulted in a loss of airplane control on the ground. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
8000
Visibility (sm)
10
Wind direction
310
Wind speed (kt)
18
Temperature (F)
37
Nearest airport
Bismarck Municipal Airport
Distance from field
0.5
Airport elevation
1661

Aircraft

RegistrationMakeModelDamageFAR part
N425Z — — SUBS 091

Sequence of events

#OccurrencePhase
1 Taxi Collision with terr/obj (non-CFIT) Taxi
3 Taxi Sys/Comp malf/fail (non-power) Taxi
4 Taxi Loss of control on ground defining Taxi

Findings

Finding
Personnel issues-Action/decision-Action-Incorrect action selection-Pilot cause
Personnel issues-Task performance-Maintenance-Scheduled/routine maintenance-Maintenance personnel cause
Aircraft-Aircraft systems-Landing gear system-Landing gear brakes system-Incorrect service/maintenance cause
Environmental issues-Physical environment-Object/animal/substance-Residence/building-Effect on equipment factor
Aircraft-Fluids/misc hardware-Fluids-(general)-Fluid level cause