N8911F Hughes 269A accident

NTSB ERA23LA146 · 2023-03-09 · Titusville, FL

Docket — crew, injuries and powerplant

Factual narrative

The flight instructor reported that he was demonstrating a 180° autorotation for his passenger into an open field off airport grounds. Nearing the end of the maneuver, prior to touchdown, he failed to recover engine power in a timely manner which resulted in the rapid decay of the rotor rpm at low altitude; this resulted in a hard landing that subsequently caused the main rotor blades to make contact with the tail boom and severed the tail rotor driveshaft. The helicopter sustained substantial damage to the fuselage and the main rotor blades. The pilot reported that there were no pre accident mechanical malfunctions with the helicopter that would have precluded normal operation.

Probable cause

The pilot’s failure to maintain adequate main rotor RPM during an autorotation which resulted in a hard landing and subsequent rotor blade strike of the tail boom. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
7
Wind direction
100
Wind speed (kt)
8
Temperature (F)
79
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N8911F HUGHES 269A SUBS 091

Sequence of events

#OccurrencePhase
3 Autorotation Hard landing defining Descent
4 Emergency descent Simulated/training event Descent

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Prop/rotor parameters-Capability exceeded factor
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Descent rate-Not attained/maintained cause
Aircraft-Aircraft power plant-Engine (reciprocating)-Recip engine power section-Simulated malf/failure factor
Personnel issues-Action/decision-Action-Delayed action-Pilot cause