N165CT Flight Design Gmbh CTSW accident

NTSB CEN23LA200 · 2023-05-23 · Gregory, MI · near 69G

Docket — crew, injuries and powerplant

Summary

The pilot was landing on a grass runway with a slight right quartering tailwind. During the landing, the nose landing gear bounced after touchdown then separated from the airplane. The airplane nosed over and came to rest inverted. The fuselage and empennage sustained substantial damage. Metallurgical examination of the nose landing gear rotation unit revealed the fracture surfaces were consistent with shear overstress. A review of the maintenance logbooks revealed that the nose landing gear had been replaced two previous times due to hard landing events. No anomalies were noted with the airplane that would have precluded normal operation. It is likely that the landing was harder than the pilot perceived, which resulted in the shear overstress of the nose landing gear.

Full narrative

On May 23, 2023, about 0946 eastern daylight time, a Flight Design GMBH CTSW, N165CT, was substantially damaged when it was involved in an accident at Richmond Field Airport (69G), Gregory, Michigan. The pilot was not injured. The flight was conducted under the provisions of Title 14 Code of Federal Regulations Part 91 as a personal flight. The pilot reported that after a 40-minute flight he overflew 69G to familiarize himself with the area and the condition of the turf runway before he entered a left traffic pattern for runway 36. The automated weather observing system reported the wind was nearly calm. He flew the final approach at the “appropriate speed with 40 degrees of flaps” extended. During the landing, the nose landing gear gently bounced after touchdown then the nose collapsed, and the airplane nosed over. The responding Federal Aviation Administration inspector stated that the nose landing gear strut was found separated at the fork. A flight control continuity check was completed, and no anomalies were found. Photos of the airplane revealed the fuselage and empennage sustained substantial damage. Metallurgical examination of the nose landing gear rotation unit revealed the fracture surfaces were consistent with shear overstress. A review of the maintenance logbooks revealed that the nose landing gear had been replaced two previous times due to hard landing events. No anomalies were noted with the airplane that would have precluded normal operation.

Recorded wind at the time of the accident was from 140° at 4 knots.

Probable cause

The pilot’s improper landing flare that resulted in a hard, bounced landing and subsequent overstress failure of the nose landing gear. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
140
Wind speed (kt)
4
Temperature (F)
64
Nearest airport
Richmond Field Airport
Distance from field
0.0
Airport elevation
921

Aircraft

RegistrationMakeModelDamageFAR part
N165CT FLIGHT DESIGN GMBH CTSW SUBS 091

Sequence of events

#OccurrencePhase
2 Landing-flare/touchdown Hard landing defining Cruise

Findings

Finding
Aircraft-Aircraft structures-(general)-(general)-Capability exceeded cause
Personnel issues-Action/decision-Info processing/decision-Decision making/judgment-Pilot factor
Environmental issues-Conditions/weather/phenomena-(general)-(general)-Response/compensation factor
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Landing flare-Not attained/maintained cause
Personnel issues-Action/decision-Action-Incorrect action performance-Pilot cause