N6PK accident

NTSB WPR23LA226 · 2023-05-25 · Sunnyside, WA · near 1S5

Docket — crew, injuries and powerplant

Summary

The pilot reported that while on final approach he extended the gear, and a green light illuminated signifying that the gear was down. The landing was “firm” and, shortly after touchdown, the airplane’s right main landing gear slowly collapsed, causing the right wing to drop. The airplane veered to the right, exited the runway, and came to rest in a field about 100 ft from the runway centerline. During the accident sequence, the airplane sustained substantial damage to the right horizontal stabilizer and elevator. Postaccident examination of the right main landing gear fracture surface revealed that the side brace lock assembly likely fractured due to excessive axial compression loads that resulted in a ductile overstress fracture. Additionally, the bent side brace lock assembly attachment bolt at the lower end of the lock link also indicated that the loads associated with the failure of the attachment pin exceeded the design axial loads for the side brace lock assembly and were consistent with overload of the side brace lock assembly. The bearings and pin that attached the side brace lock to the lower end of the bellcrank, which were not recovered, were likely fractured as a result of the loads. The damage to the gear indicated that it likely failed as a result of the hard landing.

Full narrative

On May 25, 2023, about 1245 Pacific daylight time, a Cessna 310I airplane, N6PK, was substantially damaged when it was involved in an accident near Sunnyside, Washington. The pilot and passenger were not injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

The pilot reported that the final approach for landing was normal and after the gear handle was lowered he got a green light signifying that the gear was down. The landing was “firm” and, shortly after touchdown, the airplane’s right main landing gear slowly collapsed, causing the right wing to drop. Subsequently, the airplane veered to the right and exited the runway. The airplane came to rest in a field adjacent to the runway, about 100 ft from the runway centerline. During the accident sequence, the airplane sustained substantial damage to the right horizontal stabilizer and elevator. Postaccident examination of the right main landing gear revealed that the side brace lock assembly of the left main landing gear had separated. The lock assembly was sent to the National Transportation Safety Board Material’s laboratory for examination. Examination revealed that the forward lug of the clevis at the lower end of the bellcrank was fractured and the other lug remained intact. The mating side of the fractured lug, the bearings, and pin that attached the side brace lock to the lower end of the bellcrank were not recovered.

The fracture surface had a rough matte appearance that was consistent with a ductile overstress fracture. Additionally, a portion of the fracture surface had smearing damage on the aft side that was consistent with sliding contact with the side brace lock link. On the intact lug, the inboard forward portion of the hole was deformed. The attachment bolt at the lower end of the left main landing gear side brace lock assembly was bent downwards. The lock link deformation and the bent bolt attaching the lock link to the side brace were consistent with axial compression loads on the assembly. A brownish black object was observed in the inboard side of the attachment pin hole, consistent with the set screw for the retaining pin that attached the bellcrank to the lock link. The area surrounding the attachment pin hole was deformed with a curved shape consistent with contact with the lower end of the missing bellcrank flange after being displaced downward relative to the lock link (these areas are normally not in contact in an intact assembly).

Probable cause

The failure of the side brace lock assembly of the right main landing gear due to overstress as a result of a hard landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
120
Wind speed (kt)
5
Temperature (F)
73
Nearest airport
Sunnyside Municipal Airport
Distance from field
0.0
Airport elevation
768

Aircraft

RegistrationMakeModelDamageFAR part
N6PK — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Landing gear collapse defining Cruise
2 Landing-landing roll Runway excursion Cruise
3 Landing Hard landing Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Main landing gear-Failure cause
Aircraft-Aircraft systems-Landing gear system-Main landing gear-Capability exceeded cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Landing flare-Not attained/maintained cause