N8889K accident

NTSB WPR23LA271 · 2023-07-11 · Burlington, WA · near BVS

Docket — crew, injuries and powerplant

Factual narrative

The pilot in the tailwheel equipped airplane reported that, while landing with a crosswind, a gust of wind was encountered that “caught my tail” and pushed the airplane to the left. The pilot applied full right rudder, “not realizing my feet were partially on the brakes,” and full throttle to abort the landing. The airplane turned to the right and the pilot applied left rudder to keep the airplane on the runway. The airplane entered the runway safety area, impacted a berm, resulting in the airplane becoming airborne, sending it into the parking area at the airport. The airplane impacted the top of another airplane tied down in the parking area. The right wing and fuselage were substantially damaged. The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation. At the time of the accident, the pilot was landing on runway 29 with wind from 180° at 8 knots.

Probable cause

The pilot’s failure to maintain directional control during the landing roll with a quartering tailwind. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
180
Wind speed (kt)
7
Temperature (F)
70
Nearest airport
Skagit Regional Airport
Distance from field
0.0
Airport elevation
145

Aircraft

RegistrationMakeModelDamageFAR part
N8889K — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Other weather encounter Cruise
2 Landing-landing roll Loss of control on ground defining Cruise

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause
Environmental issues-Conditions/weather/phenomena-Wind-Tailwind-Effect on operation factor