N814DW Dehavilland DHC-2 accident
NTSB ANC23LA052 · 2023-07-12 · McCarthy, AK
Docket — crew, injuries and powerplant
Factual narrative
The pilot reported that during the landing roll on a gravel-covered airstrip, the airplane veered left, went through an embankment, and came to rest upright. A postaccident examination of the airplane revealed the right brake caliper bolts failed in overload. The lower bolt was broken in half, the upper bolt was not located, and the brake caliper was located in brush. Given that the airplane is routinely operated from rough, uneven, gravel-covered, off airport sites, it is likely that the brake caliper and bolts sustained impact damage, resulting in the failure of the attachment hardware.
Probable cause
A failure of the right brake caliper bolts during landing, which resulted in a runway excursion and subsequent impact with terrain. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- NONE
- Ceiling (ft)
- 0
- Visibility (sm)
- 10
- Wind direction
- 0
- Temperature (F)
- 55
- Distance from field
- 0.0
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N814DW | DEHAVILLAND | DHC-2 | SUBS | 135 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 1 | Landing Loss of control on ground | Cruise |
| 2 | Landing Runway excursion | Cruise |
| 3 | Landing Sys/Comp malf/fail (non-power) defining | Cruise |
Findings
| Finding | |
|---|---|
| Aircraft-Aircraft systems-Landing gear system-Landing gear brakes system-Failure | factor |