N83391 accident

NTSB ANC23LA053 · 2023-07-13 · Ninilchik, AK · near PASX

Docket — crew, injuries and powerplant

Summary

While en route during a scenic flight, the pilot noticed the engine was not making enough power for the set power setting and the oil pressure and oil temperature gauges both indicated zero. He started a climb to clear rising terrain when the engine started to vibrate violently and then the engine lost all power. The pilot made a forced landing on to a road and, after touching down, veered to avoid traffic. The airplane impacted a guardrail and nosed over, sustaining substantial damage to the fuselage and wings. A postaccident examination of the engine revealed that the crankshaft’s No. 1 main bearing had spun, smearing metal into the crankcase and blocking the oil port. Numerous fragments of bearing material were found inside the engine. Based on the available information, it is likely that the shift of the No. 1 main bearing resulted in a lack of lubrication and subsequent failure of the engine. The reason for the bearing shift was not determined; the owner was not able to provide maintenance records for the engine.

Full narrative

On July 12, 2023, about 1620 Alaska daylight time, a Aeronca 7DC airplane, N83391 sustained substantial damage when it was involved in an accident near Ninilchik, Alaska. The pilot and passenger were not injured. The airplane was operated by the pilot as a Title 14 Code of Federal Regulations Part 91 personal flight.

Pilot reported that he and a friend were on a scenic flight from the Homer Airport (HOM), Homer, Alaska, to the Soldotna Airport (SXQ), Soldotna, Alaska. En route he noticed the engine was not making enough power for the set power setting. At full throttle the engine was only producing about 2,400 rpm. He ran through checklist memory items for loss of engine power, which included applying carburetor heat; however, there was no change in the engine power. The pilot also opened both wing tanks to increase fuel in the header tank, which also resulted in no change. He then noticed the oil pressure gauge and oil temperature gauge both indicated zero. The pilot initiated a climb to clear rising terrain when the engine started to vibrate violently and then lost all power. He initiated a forced landing on to a road and, after touching down, he veered left to avoid cars. The airplane impacted a guardrail and then nosed over. The airplane sustained substantial damage to the fuselage and wings. A postaccident examination of the engine revealed that the crankshaft’s No. 1 main bearing had spun, smearing metal into the crankcase and blocking the oil port. Numerous fragments of bearing material were found inside the case. The owner was not able to provide maintenance records for the engine.

Probable cause

A total loss of engine power due to a shift of a crankshaft main bearing, which resulted in a lack of lubrication and subsequent overheating and failure of the engine crankshaft. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
5000
Visibility (sm)
10
Wind direction
250
Wind speed (kt)
9
Temperature (F)
57
Nearest airport
Soldotna
Distance from field
35.0
Airport elevation
113

Aircraft

RegistrationMakeModelDamageFAR part
N83391 — — SUBS 091

Sequence of events

#OccurrencePhase
1 Enroute Loss of engine power (total) defining Climb
2 Landing-landing roll Collision with terr/obj (non-CFIT) Cruise
3 Landing-landing roll Nose over/nose down Cruise

Findings

Finding
Aircraft-Aircraft power plant-Engine (reciprocating)-Recip eng oil sys-Damaged/degraded cause
Aircraft-Aircraft power plant-Engine (reciprocating)-Recip engine power section-Damaged/degraded cause