N603CT Flight Design Gmbh CTSW accident

NTSB CEN23LA408 · 2023-09-07 · Berryville, AR · near 4M1

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that he performed a landing using 30° flap setting for practice and the airplane bounced. He decided to perform a go-around because he wanted to perform a better landing. He applied full engine power and the airplane pitched up and entered a left bank that the pilot was not able to correct. The airplane continued in the left bank until striking trees on the left side of the runway. The airplane received substantial damage to the fuselage, right wing and empennage. The pilot reported that there were no preaccident mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Probable cause

The pilot’s failure to maintain aircraft control during the attempted go-around. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
9
Wind direction
0
Temperature (F)
82
Nearest airport
CARROLL COUNTY
Distance from field
0.0
Airport elevation
1205

Aircraft

RegistrationMakeModelDamageFAR part
N603CT FLIGHT DESIGN GMBH CTSW SUBS 091

Sequence of events

#OccurrencePhase
1 Approach-VFR go-around Loss of control in flight defining Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause