N103WC accident

NTSB WPR24LA036 · 2023-11-15 · Estacada, OR

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that he was relocating bundles of trees from the harvest field onto a truck bed. Approximately 30 minutes into the operation, the load hook did not immediately release when he was setting a bundle down. The pilot pressed the release button multiple times, as he had done in similar situations in the past. The helicopter’s momentum, as it moved back towards the field, caused the bundle to slide a few feet. One of the main rotor blades then struck the tail boom, and the other blade flapped down, cutting off the rear section of the tail boom, vertical stabilizer, and tail rotor. The helicopter spun several times before landing, resting flat on the skids. The landing impact was forceful enough to break the mast and dislodge the main transmission. The helicopter sustained substantial damage to the main rotor, tail boom, vertical stabilizer, tail rotor, and transmission. The pilot reported that there were no preaccident mechanical malfunctions or failures with the helicopter that would have precluded normal operations.

Probable cause

The pilot’s failure to maintain helicopter control during an external load operation, which resulted in the helicopter’s main rotor blades impacting the tail boom. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Dawn
Sky condition
BKN
Ceiling (ft)
700
Visibility (sm)
2.5
Wind direction
20
Wind speed (kt)
4
Temperature (F)
46
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N103WC — — SUBS 133

Sequence of events

#OccurrencePhase
3 Maneuvering-hover Loss of control in flight defining Climb
4 Maneuvering-hover External load event (Rotorcraft) Climb

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-(general)-Not attained/maintained cause