N8538N Piper PA28 accident

NTSB CEN24LA059 · 2023-12-10 · Lubbock, TX · near LBB

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that during the approach the airplane was flying “3-5 mph faster than normal” to account for the gusting wind condition. Just prior to the nosewheel touching down, the pilot felt a “strong gust that pulled the nose of the aircraft into the wind.” As the nosewheel touched down, the pilot applied right rudder, and the airplane departed the runway. The airplane impacted a runway sign, the nose gear collapsed, and the airplane came to rest upright with a nose down attitude. The two occupants were able to egress from the airplane without further incident. The airplane sustained substantial damage to the engine mount. The pilot reported that there were no preimpact mechanical malfunctions or failures with the airframe or the engine that would have precluded normal operation.

Probable cause

The pilot’s failure to maintain directional control during the landing that resulted in a runway excursion, an impact with a runway sign, and a nose gear collapse. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
230
Wind speed (kt)
18
Temperature (F)
45
Nearest airport
LUBBOCK PRESTON SMITH INTL
Distance from field
0.0
Airport elevation
3282

Aircraft

RegistrationMakeModelDamageFAR part
N8538N PIPER PA28 SUBS 091

Sequence of events

#OccurrencePhase
2 Landing-flare/touchdown Loss of control on ground defining Cruise
3 Landing-flare/touchdown Runway excursion Cruise
4 Landing-landing roll Ground collision Cruise
5 Landing-landing roll Landing gear collapse Cruise
6 Landing-landing roll Nose over/nose down Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause