N7067W accident

NTSB CEN24LA062 · 2023-12-12 · New Orleans, LA · near NEW

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that the airplane touched down on the left and right main landing gear wheels. A few seconds later, the pilot felt that something failed on the left main landing gear, and the left wing began to drop to the runway. The left wing contacted the runway, and the pilot attempted to maintain directional control. Subsequently, the airplane exited the runway surface, which resulted in substantial damage to the left wing, left aileron, and horizontal stabilizer. Maintenance records revealed the main landing gear were overhauled about two months prior to the accident. The pilot reported he had completed about 8 to 10 takeoffs and landings during those two months. Postaccident examination revealed the main landing gear system was improperly rigged and the improper installation of hardware which resulted in the overstress failure of the left main landing gear system.

Probable cause

The improper maintenance of the main landing gear, which resulted in a collapse and overstress failure of the left main landing gear during landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
70
Wind speed (kt)
10
Temperature (F)
61
Nearest airport
LAKEFRONT
Distance from field
0.0
Airport elevation
7

Aircraft

RegistrationMakeModelDamageFAR part
N7067W — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Sys/Comp malf/fail (non-power) defining Cruise
2 Landing-landing roll Landing gear collapse Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Main landing gear-Failure cause
Aircraft-Aircraft systems-Landing gear system-Main landing gear-Incorrect service/maintenance cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Attain/maintain not possible cause