N70WP accident

NTSB WPR24LA077 · 2024-01-17 · Yuma, AZ · near NYL

Docket — crew, injuries and powerplant

Factual narrative

The pilot of the gyroplane was preparing for takeoff, but he noticed that the brakes felt mushy and were not properly holding as he increased engine power. Consequently, when the main rotor RPM reached 150 RPM, he released the brakes and increased power. The gyroplane then rolled over onto its side. According to the Pilot’s Operating Handbook, takeoff with 150-200 main rotor RPM “requires a high skill,” and normal takeoffs are initiated when 220 main rotor RPM is attained. The pilot reported that there were no preaccident mechanical malfunctions or failures with the gyroplane that would have precluded normal operation and acknowledged that he should have aborted the takeoff.

Probable cause

The pilot’s decision to takeoff with low rotor RPM and his subsequent loss of control. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
20000
Visibility (sm)
7
Wind direction
0
Temperature (F)
72
Nearest airport
Yuma International Airport
Distance from field
0.2
Airport elevation
213

Aircraft

RegistrationMakeModelDamageFAR part
N70WP — — SUBS 091

Sequence of events

#OccurrencePhase
2 Takeoff Loss of control on ground defining Takeoff

Findings

Finding
Personnel issues-Action/decision-Info processing/decision-Decision making/judgment-Pilot cause
Aircraft-Aircraft oper/perf/capability-(general)-(general)-Incorrect use/operation factor
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Lateral/bank control-Not attained/maintained cause