N42PL accident
NTSB WPR24LA138 · 2024-05-02 · Lewiston, ID
Docket — crew, injuries and powerplant
Factual narrative
According to the pilot, while performing an aerial application on a field, the helicopter struck a set of power lines that he was previously aware of and had been working around during the flight. Following the impact with wires, he initiated a forced landing to a field. The helicopter sustained substantial damage to the main rotor blades, transmission, tail rotor drive shaft, and tail boom. The pilot reported there were no mechanical failures or anomalies with the helicopter that would have precluded normal operation.
Probable cause
The pilot’s failure to maintain clearance from power lines during a low level aerial application. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- Minor
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- NONE
- Ceiling (ft)
- 0
- Visibility (sm)
- 10
- Wind direction
- 0
- Temperature (F)
- 60
- Distance from field
- 0.0
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N42PL | — | — | SUBS | 137 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 3 | Maneuvering-low-alt flying Low altitude operation/event defining | Climb |