N2302F Sikorsky S-55QT accident

NTSB WPR24LA173 · 2024-06-03 · Benton City, WA

Docket — crew, injuries and powerplant

Factual narrative

The pilot stated that the purpose of the flight was to hover over cherry trees in attempt to dry off the orchard following a rain shower. While maneuvering about 30 ft above ground level (agl) at an airspeed of about 20 mph, parallel to power lines on his right side, he performed a turn, and the tail rotor blades contacted and severed the adjacent power lines. The pilot felt a tail-rotor imbalance and opted to land immediately. During the accident sequence, the helicopter sustained substantial damage to the tail rotor. The pilot reported that there were no pre-impact mechanical malfunctions or failures that precluded normal operation.

Probable cause

The pilot’s failure to maintain clearance from power lines during a low altitude operation. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
6000
Visibility (sm)
10
Wind direction
120
Wind speed (kt)
7
Temperature (F)
63
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N2302F SIKORSKY S-55QT SUBS 091

Sequence of events

#OccurrencePhase
2 Maneuvering-low-alt flying Low altitude operation/event defining Climb

Findings

Finding
Personnel issues-Psychological-Attention/monitoring-Monitoring environment-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Altitude-Not attained/maintained cause
Environmental issues-Physical environment-Object/animal/substance-Wire-Awareness of condition cause