N504CT Flight Design Gmbh CTSW accident
NTSB ERA24LA325 · 2024-07-23 · Cuba, NY
Docket — crew, injuries and powerplant
Factual narrative
The pilot was landing the airplane on a turf runway and stated that the landing approach was nominal. The pilot described that the “…airspeed, landing spot, and flare were perfect.” Upon touchdown, the right main landing gear’s wheel assembly separated from the landing gear strut. The strut subsequently dug into the ground and the airplane’s fuselage was substantially damaged. A Federal Aviation Administration inspector who examined the airplane after the accident reported that the landing gear strut had fractured about 5 inches inboard of from the wheel assembly.
Probable cause
A separation of the left main landing gear wheel assembly during landing. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- NONE
- Ceiling (ft)
- 0
- Visibility (sm)
- 10
- Wind direction
- 0
- Temperature (F)
- 73
- Nearest airport
- Private Airstrip
- Distance from field
- 0.0
- Airport elevation
- 2200
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N504CT | FLIGHT DESIGN GMBH | CTSW | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 2 | Landing-flare/touchdown Part(s) separation from AC defining | Cruise |
Findings
| Finding | |
|---|---|
| Aircraft-Aircraft systems-Landing gear system-Main gear strut/axle/truck-Failure | cause |