N3591R accident

NTSB CEN24LA323 · 2024-08-21 · Cut and Shoot, TX · near 25TX

Docket — crew, injuries and powerplant

Factual narrative

The student pilot reported that the purpose of the flight was to complete a second solo cross country. The student pilot flew to the planned destination airport where she performed a touch and go landing and then returned to the originating airport. During the final approach for landing, she lined up with the runway centerline; however, as the airplane got closer to the ground, she realized she had drifted too far left of the centerline. The student pilot attempted a go around but was not able to gain enough altitude to clear a nearby fence. The airplane’s left wing struck the fence, and the airplane came down on the fence to a stop. The airplane sustained substantial damage to the fuselage and both wings. The student pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Probable cause

The pilot’s failure to maintain directional control during a go-around that resulted in an impact with a fence. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Wind speed (kt)
4
Temperature (F)
99
Nearest airport
Chennault Airfield
Distance from field
0.0
Airport elevation
169

Aircraft

RegistrationMakeModelDamageFAR part
N3591R — — SUBS 091

Sequence of events

#OccurrencePhase
2 Approach-VFR pattern final Course deviation Cruise
3 Approach-VFR go-around Collision during takeoff/land defining Cruise

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause