N6815B accident

NTSB ANC24LA082 · 2024-08-25 · Sagwon, AK

Docket — crew, injuries and powerplant

Factual narrative

The pilot stated he was landing on a remote, rough and uneven gravel bar in a tailwheel-equipped airplane. During the landing roll, the left wing suddenly dipped, and it subsequently struck the gravel bar, sustaining substantial damage. A postaccident examination revealed that the left main landing gear had separated. Examination of the separated landing gear revealed the fractured areas of the weld at the fuselage attachment point exhibited rounded, reflected features consistent with a lack of fusion. In addition, there were areas that were absent of weld material along the circumferential or peripheral area, consistent with a lack of fusion. According to maintenance records the weld was from a landing gear conversion about 11 years prior to the accident.

Probable cause

A failure of the landing gear fitting at the fuselage attachment point to due to a poor weld joint. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
2800
Visibility (sm)
10
Wind direction
270
Wind speed (kt)
12
Temperature (F)
39
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N6815B — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Landing gear collapse defining Cruise
2 Landing-landing roll Sys/Comp malf/fail (non-power) Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Main landing gear attach sec-Failure cause