N11AS Hughes 369D accident

NTSB ERA25LA040 · 2024-11-05 · Waycross, GA · near AYS

Docket — crew, injuries and powerplant

Factual narrative

The pilot was conducting tree trimming operations on a power line right of way that consisted of a 10-blade aerial saw that was slung below the helicopter. During the cutting, a saw blade snagged a 1/2-inch cable that wrapped itself around the lower saw blades. A section of the cable broke off and struck the tail rotor assembly, damaging the stabilizers and tail rotor drive shaft. The helicopter lost all tail rotor authority and began an uncontrolled yaw, impacting the trees as it descended to the terrain where it came to rest on its left side. The impact resulted in substantial damage to the airframe and rotor blades. The operator did not report that there were any preimpact mechanical failures or malfunctions of the helicopter that would have precluded normal operation.

Probable cause

An encounter with a foreign object, which resulted in a loss of control and collision with terrain. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
110
Wind speed (kt)
9
Temperature (F)
84
Nearest airport
WAYCROSS-WARE COUNTY
Distance from field
1.0
Airport elevation
141

Aircraft

RegistrationMakeModelDamageFAR part
N11AS HUGHES 369D SUBS 133

Sequence of events

#OccurrencePhase
1 Maneuvering-low-alt flying External load event (Rotorcraft) defining Climb
2 Maneuvering-low-alt flying Loss of control in flight Climb

Findings

Finding
Environmental issues-Physical environment-Object/animal/substance-Wire-Effect on equipment cause
Aircraft-Aircraft propeller/rotor-Tail rotor drive system-Tail rotor drive shaft-Damaged/degraded cause
Aircraft-Aircraft structures-Empennage structure-Horizontal stabilizer-Damaged/degraded cause