N143MG accident

NTSB ERA25LA043 · 2024-11-09 · Alcoa, TN · near TYS

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that his approach and landing were normal. After exiting the runway, while on a taxiway, the airplane “swerved to the right and seemed to accelerate.” Unable to control braking and steering, the airplane departed the taxiway to the right and proceeded through a steep depression before colliding with a wind sensor pole. The pilot secured the airplane and was met by first responders. The airplane’s right wing and fuselage were substantially damaged during the accident sequence. Postaccident examination of the airplane revealed that the brass splined bushing on the left engine throttle control shaft was stripped, which resulted in an uncontrollable, full power application to that engine. The wheel brakes were examined and no anomalies were found; the brakes held the airplane in place with the left engine at full power during a test run.

Probable cause

The failure of the left engine throttle control shaft bushing during taxi, resulting in a full asymmetric power condition and a taxiway excursion. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
50
Wind speed (kt)
6
Temperature (F)
64
Nearest airport
McGhee Tyson Airport
Distance from field
0.0
Airport elevation
986

Aircraft

RegistrationMakeModelDamageFAR part
N143MG — — SUBS 091

Sequence of events

#OccurrencePhase
2 Taxi Ground collision Taxi
3 Taxi-from runway Loss of control on ground defining Taxi

Findings

Finding
Aircraft-Aircraft power plant-Engine fuel and control-Fuel control/carburetor-Fatigue/wear/corrosion cause