N1935V accident

NTSB CEN25LA072 · 2025-01-08 · Harvard, IL · near 0C0

Docket — crew, injuries and powerplant

Factual narrative

The pilot moved the airplane from his hangar to go flying. The airplane was positioned about 20 ft from the edge of the hangar. The pilot stated that he initially had trouble starting the engine, so he advanced the throttle to full, and the engine started. The pilot stated that he held the brakes while he was starting the airplane and after the engine started, the airplane rolled into the edge of the hangar. The fuselage and left wing of the airplane sustained substantial damage during the collision. The pilot estimated that the entire event lasted about 2-3 seconds from engine start to the collision with the hangar. The airplane pilot operating handbook stated that the brake should be set before engine startup. The pilot reported that there were no preimpact mechanical malfunctions or failures with the airplane that would have precluded normal operation. Inspection of the airplane’s brake and throttle systems did not reveal any pre-accident anomalies.

Probable cause

The pilot’s failure to control the airplane during the engine start which resulted in a collision with the hangar. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
300
Wind speed (kt)
10
Temperature (F)
23
Nearest airport
Dacy
Distance from field
0.0
Airport elevation
913

Aircraft

RegistrationMakeModelDamageFAR part
N1935V — — SUBS 091

Sequence of events

#OccurrencePhase
3 Standing-engine(s) start-up Ground collision defining Standing

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Use of equip/system-Pilot cause
Personnel issues-Task performance-Use of equip/info-Use of checklist-Pilot cause