N1243Y Bell Helicopter Textron Canada 505 accident
NTSB CEN25LA084 · 2024-11-11 · Lago Vista, TX · near RYW
Docket — crew, injuries and powerplant
Factual narrative
While conducting an instructional flight, the flight instructor reported that he and the student pilot were practicing straight-in autorotation approaches in the helicopter with a power recovery. The helicopter was configured with a throttle control switch rather than a twistable throttle control. During the fifth autorotation approach, the flight instructor forgot to move the throttle control from “Idle” to “Fly” prior to flaring the helicopter. The helicopter descended and landed hard on the runway. During the hard landing, the helicopter sustained substantial damage to the tailboom. The flight instructor reported that there were no mechanical malfunctions or failures that contributed to the accident.
Probable cause
The flight instructor’s improper recovery from a practice autorotation which resulted in a hard landing. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- NONE
- Ceiling (ft)
- 0
- Visibility (sm)
- 8
- Wind direction
- 360
- Wind speed (kt)
- 6
- Temperature (F)
- 77
- Nearest airport
- LAGO VISTA TX/RUSTY ALLEN
- Distance from field
- 0.0
- Airport elevation
- 1230
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N1243Y | BELL HELICOPTER TEXTRON CANADA | 505 | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 2 | Approach Simulated/training event | Cruise |
| 3 | Autorotation Hard landing defining | Descent |
Findings
| Finding | |
|---|---|
| Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Powerplant parameters-Incorrect use/operation | cause |