N59BR Arlie L Raber Iii CHALLENGER 1 accident

NTSB ERA25LA197 · 2025-05-04 · Crestview, FL · near FD93

Docket — crew, injuries and powerplant

Factual narrative

The pilot was having difficulty controlling the airplane’s rudder pedals due to his physical stature. After several taxi attempts up and down the runway, he elected to take off for a short flight. After becoming airborne, the pilot began to have yaw controllability problems. He attempted to land, but was unable to control the airplane’s movements effectively, as his knees were contacting the instrument panel, and his feet were wedged behind the rudder pedals. The airplane continued to fly over terrain about 6 feet above ground level. With trees approaching, the pilot pushed the nose of the airplane down resulting in a hard landing. The airplane sustained substantial damage to the forward portion of the fuselage and the left wing. The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Probable cause

The pilot’s decision to take off despite having problems controlling the airplane due to his physical stature. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
79
Nearest airport
YELLOW RIVER AIRSTRIP
Distance from field
1.75
Airport elevation
150

Aircraft

RegistrationMakeModelDamageFAR part
N59BR ARLIE L RABER III CHALLENGER 1 SUBS 091

Sequence of events

#OccurrencePhase
2 Landing Loss of control in flight defining Cruise
3 Landing Miscellaneous/other Cruise
4 Landing Hard landing Cruise

Findings

Finding
Personnel issues-Physical-Physical characteristic-Size-Pilot cause
Personnel issues-Action/decision-Info processing/decision-Decision making/judgment-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Yaw control-Attain/maintain not possible cause