N8817P accident

NTSB CEN25LA220 · 2025-06-24 · Ashland, WI · near ASX

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that the flight was a local sightseeing flight with a passenger. They departed the pilot’s home base airport and flew at a lower level than normal for sightseeing purposes. They planned to land at another airport for lunch and due to the low level of the flight the pilot’s normal routine was disrupted and he did not perform his normal pre-landing checks. He stated that the landing was normal until the propeller blades struck the runway. After the airplane slid to a stop, he realized that he had not placed the landing gear selector in the “down” position. He stated that there were no mechanical problems with the airplane. The airplane sustained substantial damage to the lower fuselage.

Probable cause

The pilot’s failure to extend the landing gear before landing and his failure to conduct the before landing checklist. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
20
Wind speed (kt)
8
Temperature (F)
68
Nearest airport
JOHN F KENNEDY MEML
Distance from field
0.0
Airport elevation
826

Aircraft

RegistrationMakeModelDamageFAR part
N8817P — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-flare/touchdown Landing gear not configured defining Cruise

Findings

Finding
Personnel issues-Action/decision-Action-Forgotten action/omission-Pilot cause
Aircraft-Aircraft systems-Landing gear system-Gear extension and retract sys-Not used/operated cause
Personnel issues-Task performance-Use of equip/info-Use of equip/system-Pilot cause