N34655 accident

NTSB ERA25LA244 · 2025-06-24 · Calera, AL · near EET

Docket — crew, injuries and powerplant

Factual narrative

The pilot had planned to fly in the airport traffic pattern to practice takeoffs and landings. The pilot stated that during the first landing, after touchdown on the main wheels, he felt a “jolt” when the nosewheel came down and the airplane veered to the left and off the runway. To avoid a worker mowing in the vicinity, he initially applied the brakes and aft pressure on the control yoke in an attempt to slow the airplane. He then applied full right rudder and added power, and the airplane turned right, briefly became airborne as the airplane returned to the runway surface. The airplane then touched down “hard” on the nose landing gear and the pilot brought the airplane to a stop. The fuselage aft of the firewall was substantially damaged during the accident sequence. The worker who was mowing reported that he saw the airplane “wobbling” as it approached the runway. He then stopped cutting the grass and moved the mower closer to the airport perimeter fence to stay out of the airplane’s way. He continued to watch the airplane and described that during the landing it contacted the runway and bounced three times before he saw the airplane’s nose hit the ground, after which he watched it exit the runway.

Probable cause

A loss of control during landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
9
Wind direction
0
Temperature (F)
90
Nearest airport
SHELBY COUNTY
Distance from field
0.0
Airport elevation
585

Aircraft

RegistrationMakeModelDamageFAR part
N34655 — — SUBS 091

Sequence of events

#OccurrencePhase
5 Landing-flare/touchdown Abnormal runway contact defining Cruise

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause