N1591V accident

NTSB CEN25LA230 · 2025-06-28 · Wichita, KS · near ICT

Docket — crew, injuries and powerplant

Factual narrative

The student pilot was planning to perform three takeoffs and three landings for his first solo flight. After completing the second landing, the student pilot applied full power for the takeoff. When the student pilot began to manipulate the flight controls for the takeoff, the airplane “abruptly pulled hard” toward the left. The student pilot then retarded the throttle and applied the brakes, and the airplane departed the runway to the left. The left main landing gear impacted a runway sign, and the landing gear collapsed. The airplane came to rest upright on a grass field near the runway. The student pilot was able to egress from the airplane without further incident. The airplane sustained substantial damage to the left horizontal stabilizer. The student pilot reported there were no preimpact mechanical malfunctions or failures with the airframe or the engine that would have precluded normal operation.

Probable cause

The student pilot’s failure to maintain directional control during the takeoff that resulted in a runway excursion. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
160
Wind speed (kt)
12
Temperature (F)
88
Nearest airport
WICHITA DWIGHT D EISENHOWER NT
Distance from field
0.0
Airport elevation
1332

Aircraft

RegistrationMakeModelDamageFAR part
N1591V — — SUBS 091

Sequence of events

#OccurrencePhase
1 Takeoff Loss of control on ground defining Takeoff
2 Takeoff Runway excursion Takeoff
3 Takeoff Landing gear collapse Takeoff
4 Takeoff Collision during takeoff/land Takeoff
5 Post-impact Evacuation Approach

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Student/instructed pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause