N6557Q accident
NTSB CEN25LA264 · 2025-07-20 · Pipestone, MN · near PQN
Docket — crew, injuries and powerplant
Factual narrative
The pilot reported that when the wheels touched down during landing the airplane pulled hard to the left and departed the runway despite his control inputs to correct the airplane’s direction of travel. The airplane nose landing gear collapsed during the runway excursion and the airplane came to rest inverted in the adjacent cornfield. The wings and empennage sustained substantial damage. After the accident a bystander attempted to turn the left wheel of the airplane and told the pilot he could barely move it. Later when the pilot tried to move the left wheel it turned freely. A post-accident examination of the airplane showed that the brake caliper pistons and piston bores for both main landing gear were corroded and pitted. It is likely the left brake caliper failed to release after being used during the landing due to the corroded brake components.
Probable cause
The failure of the left brake to release due to corrosion and pitting of the caliper piston and bore, which resulted in a runway excursion. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- BKN
- Ceiling (ft)
- 2400
- Visibility (sm)
- 10
- Wind direction
- 130
- Wind speed (kt)
- 11
- Temperature (F)
- 79
- Nearest airport
- PIPESTONE MUNI
- Distance from field
- 0.0
- Airport elevation
- 1736
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N6557Q | — | — | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 1 | Landing-landing roll Loss of control on ground defining | Cruise |
Findings
| Finding | |
|---|---|
| Aircraft-Aircraft systems-Landing gear system-Master cylinder/brake valve-Fatigue/wear/corrosion | cause |