N91393 accident

NTSB ANC25LA076 · 2025-07-17 · Gulkana, AK

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that immediately after touchdown he heard a “pop” or “snap,” at which point his left foot and the left rudder pedal moved fully forward to the firewall. Left rudder control was lost, and the airplane continued down the runway as the tail swung left. Unable to regain directional control, the airplane veered off the right side of the runway, ground looped, and sustained substantial damage to the left wing. A postaccident examination determined that the rudder bar assembly weld had failed at the attachment to the rudder pedal. The operator stated that the airplane is normally operated on wheel/skis, which require increased rudder pedal forces during ground operations. The operator also noted evidence of preexisting cracking along the weld that was not identified during the most recent maintenance inspection.

Probable cause

The failure of the left rudder assembly which resulted in a runway excursion and ground loop. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
260
Wind speed (kt)
5
Temperature (F)
64
Nearest airport
Sanford River strip
Distance from field
0.0
Airport elevation
3400

Aircraft

RegistrationMakeModelDamageFAR part
N91393 — — SUBS 135

Sequence of events

#OccurrencePhase
1 Taxi Sys/Comp malf/fail (non-power) defining Taxi
2 Landing-landing roll Loss of control on ground Cruise
3 Landing-landing roll Runway excursion Cruise

Findings

Finding
Aircraft-Aircraft systems-Flight control system-Elevator control system-Failure cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot factor