N3157B Air Tractor Inc AT-400A accident

NTSB CEN25LA303 · 2025-08-03 · Lamoni, IA · near LWD

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that after loading the airplane with fuel and product, he taxied the full length of the runway and began the takeoff roll. After takeoff, he flew the airplane above the runway in ground effect; however, the airplane settled back to the runway. The pilot stated that he was uncomfortable continuing the takeoff, so he aborted the takeoff by applying brakes and reducing engine power. To avoid nosing the airplane over and locking the tailwheel, he abruptly pulled back on the control stick. The airplane ballooned and came back down hard on the runway. The pilot did not want to impact houses and buildings on the side of the runway, so he kept the airplane aligned with the remaining runway. The airplane impacted shrubs and trees and came to rest in a ditch at the end of the runway. The wings and fuselage sustained substantial damaged. The pilot reported that there were no mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Probable cause

The pilot’s failure to maintain airplane control during an aborted takeoff. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
70
Nearest airport
Lamoni Municipal
Distance from field
0.30000001
Airport elevation
1131

Aircraft

RegistrationMakeModelDamageFAR part
N3157B AIR TRACTOR INC AT-400A SUBS 091

Sequence of events

#OccurrencePhase
1 Takeoff-rejected takeoff Runway excursion Takeoff
2 Takeoff-rejected takeoff Loss of control on ground defining Takeoff
3 Takeoff-rejected takeoff Attempted remediation/recovery Takeoff

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-(general)-Not attained/maintained cause